ENIMEX DIAPHRAGM GAS METER G6

Application
The ENIMEX Diaphragm Domestic Gas Meter Class G6 is a residential meter designed to measure accurately volumes of Natural Gas in apartments and households.

Basic Features
- High metrological performance
- 100% corrosion proof
- Fire Safe Steel Casing

The have synthetic diaphragm, which is made of the best quality synthetic materials, with high dimensional stability, excellent chemical resistance, against effects of measured gases, and long term durability.  Other important characteristics of the meters are the low operating noise level, the high measuring accuracy the low pressure loss.
The basic model is predisposed for external pulse emitter.  The other options are the installation of low frequency pulse emitter, the AMR (remote Automatic Reading System) and the data management.
The fine error curve adjustments, controls and tests are made in our special designed Calibration Area

International Standards
Comply with:
• EN1359 "Gas Meters"
• OIML R31/1995
• EEC regulations for gas meters

Structural Characteristics
Case & Cover: in Sheet Steel acc. to EN 10130
Fire-safe resistant to High Ambient Temperatures acc. to BS4161, DIN3374, EN1359
Measuring Group: Thermoplastic and Thermosetting raw materials
Coating cycle: Anti-corrosive surface protection incl. degreasing, rinsing, special treatment, drying, painting, baking

Technical Characteristics
Cyclic Volume: 1,2dm3
Max Flow Rate: 6m3/h
Min Flow rate: 40dm3/h
Max Working Pressure: 0,5bar
Working temperature range: -25°C up to +60°C
Max Permissible errors: Qmin≤Q<2Qmin -> +/-3%, 2Qmin≤Q≤Qmax -> +/-2%
Threaded connection diameter: Male GAS 1”1/4 acc. to ISO 228/1
Threaded connection interaxis (in/out): 110mm

Tests
100% of the Gas meters are tested “on line” during assembly for leakage and mechanical absorption
100% of the Gas meters are calibrated in Enimex Accredited Laboratory acc. to EN ISO 17025

Certificates
Material & Test certificate EN10204 3.1
Initial Verification Certificate